STOCK NO. SIZE UNIT PRICE 61001 12 oz. bottle $14.95 Sale $13.00 61001 Case of 12 12 oz. Bottle $179.40 Sale $156.00 61002 16 oz. Bottle $19.95 Sale $17.50 61002 Case of 12 16 oz. Bottle $239.40 Sale $210.00 61004 1 Gallon $129.95 Sale $114.00 61004 Case of 4 1 Gallon $519.80 Sale $456.00

RejeX is a thin-film polymer coating designed to provide a high-release surface. This very thin film - less than a micron thick - prevents stains and adhesion of common contaminants such as exhaust, bugs, oil, tree sap, bird droppings, road grime, brake dust, etc. It also makes graffiti easy to remove and can be applied to windshields to repel rain. It's easy to apply and produces a deep, lustrous shine that outlasts the most popular waxes by months.

RejeX contains none of the free silicone oils found in some other products that are known to contaminate paint and cause problems when repainting.

APPLICATION
RejeX should be applied to a cool (less than 85° F) dry surface out of direct sunlight. If the surface is too hot, the coating will cure before it has properly bonded to the surface, and it won't perform up to its potential. RejeX is wiped on, allowed to dry to a haze for approximately 20 minutes, wiped off, then allowed to cure for 12 hours.

Curing RejeX is required to allow the monomers (polymer building blocks) that make up RejeX to attach to the surface being treated and to polymerize (crosslink) into a crystal-clear, impervious film. It is very important to allow RejeX to cure for 12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, water, cleaners, etc. before it has cured, the contaminants may interfere with the film, preventing the RejeX from achieving it's maximum performance and durability.

RejeX PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS, ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL SURFACES

RejeX can be used over existing wax; however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. There is no reason to wax over RejeX. As we've already said, RejeX leaves a shinier, longer-lasting finish than wax... and the wax can't adhere well to RejeX!

If a RejeX-treated surface needs repainting, normal paint preparation is all that's required. Abrasive cleaners, polishes, rubbing compounds or chemical paint strippers will remove the RejeX film.

1. Shake RejeX well and apply to a cool surface with a clean, dry cloth.
2. After RejeX dries to a haze (like a wax), simply wipe it off. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX easily wipes on and off.
3. Allow RejeX to cure for 12 hours out of the elements.
4. For optimum protection, reapply RejeX every 4-6 months as needed.

"After a month of building up road crud, the side of the (car) treated with RejeX came clean with one swipe of the sponge..."

Read the complete Car and Driver story here

"On paint in good condition, it eliminates the need for waxes, and one application will last up to 12 months."

Good Sam Member Tested

"This is pretty cool stuff and I highly recommend it. I'm always amazed when one of the smaller companies trumps the big guys, and this is a classic example. I have no idea how they did it, but Corrosion Technologies has come up with a winner!"

Read the complete Web Bike World story here

"What makes RejeX stand out from other polishes is not just its ability to keep the boat cleaner longer, but the fact that it works on just about every non-porous surface."

Read the complete Southern Boating story here

"We were impressed with this product's ability to keep bug splats and exhaust stains from sticking to paint."

Read the complete Aviation Consumer story here

"It seals against most stains, requiring just a splash-down with little or no rubbing. A solution like this is worth the retail price."

Boating Life Magazine
The Athority On Recreational Boating

"Lasts longer than any wax job."